What is a roll clamp material handling cart?

It is a compact material handling vehicle that clamps the outside diameter of a round load, lifts it and can rotate or transfer it to the next workstation.

Can it load film rolls into slitters and rewinders?

Yes. The key use case is taking film rolls, paper rolls or tape jumbo rolls from floor or pallet height and positioning them near slitting, rewinding, coating or packaging equipment.

Is this a standard forklift?

No. A standard forklift is optimized for pallets. A roll clamp cart holds the roll circumference and controls round, rolling material.

What parameters are needed for sizing?

Roll type, weight, outside diameter, width, required lift height, rotation requirement, aisle width, floor condition and machine-side photos are enough for an initial recommendation.

Roll clamp cart for film, paper and cylindrical loads

Move rolls with one operator

Clamp, lift, rotate and feed plastic film rolls, paper rolls, tape jumbo rolls, drums and tires into slitters, rewinders and packaging lines without manual roll lifting.

Get a Sizing Plan See Applications

Film roll handling Paper roll loading Slitter feeding 360 degree rotation One operator

Operator using an electric roll clamp cart to handle a large film roll outside a factory

1 operator

4 moves clamp, lift, rotate, feed

Sized by roll weight and diameter

If roll handling slows your line, fix these four points first

Buyers usually need less manual lifting, safer control and faster machine-side loading.

Manual lifting is too slow

Large rolls force operators to bend, lift, roll and reposition material repeatedly.

Round loads are unstable

Film rolls, paper rolls and drums can roll, slip or drift when supported from the bottom.

Machine loading is hard to align

Slitters, rewinders and packaging machines need the right height, angle and approach.

Too many people are involved

Moving, holding, turning and feeding a roll often ties up two or three workers.

Clamp the outside diameter. Lift to height. Rotate into position.

A curved clamp holds the roll circumference so the operator controls the load instead of fighting it.

Clamp

Holds film rolls, paper rolls, tape jumbo rolls, drums and tires by the outside diameter.

Lift

Raises the load from floor, pallet or storage area to machine-side height.

Rotate

Optional hydraulic rotation helps change roll direction for feeding and positioning.

Feed

Transfers the roll close to slitters, rewinders, coating lines and packaging equipment.

Where it pays back fastest

The strongest use cases are short-distance roll transfer and machine-side loading.

Slitter and rewinder loading

Move film, paper and tape jumbo rolls into the loading position with fewer alignment steps.

Warehouse to production transfer

Move rolls from storage, pallets or staging areas to the next process without rolling by hand.

Line-side circulation

Keep packaging, printing, coating and converting lines supplied with less waiting time.

Drums and tires

Handle cylindrical loads that need side clamping instead of normal pallet forks.

Real equipment photos

Actual roll clamp carts, rotating clamps and handling attachments used for rolls, drums and machine-side loading.

Machine-side film roll loading

Operator-side roll loading with a curved clamp for film and paper roll handling.

Heavy-duty clamp attachment

Robust clamp carriage for heavier cylindrical loads and custom fixtures.

Drum handling clamp

Rotating clamp setup for drum and barrel handling applications.

Paper roll rotating clamp

Electric roll clamp cart holding a paper roll at height for turning and feeding.

Lift stacker platform

Compact lift stacker configuration for line-side material movement.

Stop lifting rolls by hand

Share your roll size and loading process. Dubhe will match the roll clamp cart to your actual production line.

Send Roll Specs