Send roll weight, diameter, width, aisle width and loading action. Dubhe recommends the right configuration first, then confirms parameters.
Parameters are customizable. Select first by workload, then confirm roll diameter, roll height, lift height, aisle width and drive mode.
500 kg / 1500 mm reference
Main choice for repeated film roll loading beside slitters, rewinders and packaging lines.
500 kg / 3000 mm reference
Higher lift and heavier daily use where the roll must be raised to a taller machine-side position.
350 kg / 1500 mm reference
Economical option for short indoor movement with electric lifting and hydraulic clamping.
Custom fixture
Clamp arms, rubber pads, mast height, wheel type and battery can be adapted to the roll and floor.
These custom roll clamp configurations are not fixed catalogue models. The ranges give buyers a practical starting point before final sizing.
Parameters can be customized by roll weight, diameter, width, lift height, aisle width, floor condition, battery requirement and whether the roll is picked vertically or horizontally. Keep 10-20 cm clearance on both sides of the clamp during operation.
For production lines that need electric travel, electric lifting and hydraulic clamping with a higher mast.
A compact electric travel model for vertical pickup and repeated machine-side roll feeding.
For short indoor transfers where electric lifting and clamping are needed, but travel can remain manual.
For cloth rolls, paper rolls, cable reels and other cylindrical loads that are handled from the side instead of full 360 degree rotation.
Cleaned gallery without unrelated logos or watermarks, focused on film rolls, paper rolls, machine-side loading and warehouse transfer.
Roll clamp cart staged at the machine side for plastic film roll loading and line-side feeding.
Operator moves a large roll outside the workshop with controlled clamp support instead of manual rolling.
Large paper rolls are lifted from storage and positioned for the next process with one operator.
Counterbalanced roll clamp configuration for warehouse movement where pallets, racks and aisles limit space.
Close-up of the rotating clamp structure for smaller workshops and repeated roll pickup.
Counterweight style configuration for heavier rolls, longer lift height and custom clamp dimensions.
The website should describe document types that can be prepared for real orders. Final files depend on the actual truck, battery, route and carrier requirement.
Lead-acid battery configurations can be supported with safety documents covering valve-regulated, maintenance-free and non-spillable descriptions.
Transport attribute or identification documents can be prepared according to actual model, battery, packaging and route.
Non-dangerous booking documents can be prepared according to carrier and destination requirements for material-handling equipment shipments.
Final documents should match load, roll diameter, roll width, lift height, voltage, battery and packaging instead of treating reference ranges as fixed models.
The practical value is not only the clamp action. Buyers need the roll picked from a pallet or floor, raised to machine height, turned to the right direction and held steady beside the line.
Curved clamp arms grip the outside diameter of rigid film rolls, paper rolls and tape jumbo rolls.
Lift height can be configured around 1500 mm, 3000 mm or another machine-side requirement.
360 degree left/right hydraulic rotation helps change vertical or horizontal roll orientation.
Move rolls into slitters, rewinders, laminating, coating, printing and packaging stations.
Share your roll size and loading process. Dubhe will match the roll clamp cart to your actual production line.
