DUBHEIntelligent Industrial Ecosystem
An integrated post-press equipment product line covering hot lamination, cold lamination, double-sided lamination, automatic paper separation, automatic rewinding and digital hot stamping.
The model can be selected according to the degree of automation, material width, production speed and process requirements. Click on any model to view complete parameters and functions.
Automatic paper feeding and automatic paper separation, combined with one-button electro-hydraulic pressurization and automatic pressure maintaining, are suitable for stable mass production.
The compact automatic laminating platform supports automatic paper feeding, automatic paper separation, and optional double-sided lamination.
It supports automatic paper feeding and automatic paper cutting, and is equipped with intelligent temperature control, anti-curling and edge trimming functions.
Heavy-duty high-speed series, equipped with automatic paper stacking, automatic paper separation, and optional double-sided lamination.
A heavy-duty equipment platform with automatic paper separation, high-speed operation and optional double-sided lamination as its core.
Equipped with 200mm steel roller, synchronous conveyor belt for paper feeding and automatic winding of finished products.
Special hot stamping equipment, equipped with three sets of heating, automatic separation and automatic winding of waste foil.
Integrated automatic paper stacking, automatic paper separation and PLC control, and optional double-sided lamination.
Automatic paper feeding and paper breaking, equipped with intelligent temperature control protection and anti-curling adjustment.
490 mm working width, supports automatic paper stacking, pneumatic paper separation and PLC control.
It supports automatic paper stacking and paper separation, and the front platform is removable, making it easy to configure the roll-to-roll laminating system.
The compact body is combined with automatic winding of finished products, and roll-to-roll lamination is optional.
Electric automatic paper separation can be achieved without the need for an air compressor, with lower noise and simpler installation.
It supports single and double-sided roll lamination, automatic winding of finished products, and optional plateless hot stamping.
Integrate hot stamping, single- and double-sided lamination and plastic sealing functions into a compact machine.
Suitable for single- and double-sided hot and cold lamination of graphic advertisements and wide-format prints.
Economical hot and cold laminating equipment suitable for small picture and text shops, quick printing centers and advertising processing.
Suitable equipment depends on material size, daily throughput, membrane type and subsequent processing. The following four paths can be used as a quick selection reference.
Send your processing requirements↗Automatic paper feeding, hydraulic pressure maintaining and automatic paper separation reduce manual participation.
420AF / 540AF PLUSSuitable for large-scale digital printing, posters, display screens and advertising sheets.
720Z / 1000Z / FM-1100Equipped with special hot stamping rubber rollers, waste foil rewinding and multiple heating systems.
520FOIL / 720FOIL / GS-360It occupies a smaller area and is suitable for picture and text shops, quick printing shops and small batch orders.
350E / 450E / FM SeriesDifferent models meet various post-press processing needs through automated control, stable heating and reliable sheet or roll conveyance.
Some models are equipped with PLC and touch screen to facilitate monitoring of speed, temperature and operating status.
Hydraulic and electro-hydraulic systems provide stable laminating pressure and support automatic pressure maintenance.
The heating system is placed inside the roller to help improve temperature uniformity and heat transfer efficiency.
The single-sided anti-curl mechanism helps the laminated paper stay flat for subsequent processing.
Automatic paper stacking, paper feeding, paper separation and winding functions can reduce manual operations.
Nonstick, high-temperature-resistant silicone roller helps maintain stable contact and clean lamination.
The table below provides a quick overview of the main differences. Complete functions and detailed parameters can be viewed in the product card.
| Model series | Device type | maximum width | Laminating speed | Upper roller diameter | Recommended use |
|---|---|---|---|---|---|
| 540AF PLUS / 420AF PLUS | Fully automatic hydraulic laminating | 400 / 540 mm | 0-12 m/min | 200 | Large batch sheet lamination |
| 550Z / 720Z / 1000Z | High speed hydraulic lamination | 520 / 720 / 970 mm | 0-22 m/min | 200 | High-speed wide-format sheet-fed production |
| 520Y / 720Y / 1000Y | Hydraulic winding film | 520 / 720 / 970 mm | 0-22 m/min | 200 | Continuous laminating and winding |
| 520FOIL / 720FOIL | Hydraulic hot stamping lamination | 520 / 720 mm | 0-15 m/min | 200 | Digital hot stamping and high value-added effects |
| 520B | Hydraulic sheet lamination | 490 mm | 0-18 m/min | 180 | Medium width high speed commercial laminating |
| 390B / 490B | Electric laminating machine | 350 / 490 mm | 0-12 m/min | 110 | Low noise graphic shop production |
| 350E / 450E | Electric roll lamination | 350 / 450 mm | 0-8 m/min | 100 | Flexible web and foil applications |
| GS-360 3in1 | Multifunctional laminating machine | 340 mm | 0-3 m/min | 45 | Small foil stamping and special post-press |
| FM-650 / FM-1100 | Wide width hot and cold lamination | 630 / 1050 mm | 0-3 m/min | 55/55 · 75/75 mm | Wide format graphics and advertising materials |
Public parameters are used for preliminary selection, and the final configuration is confirmed based on on-site working conditions and order specifications.
Supports manual, synchronous conveyor belt or automatic paper feeding.
Infrared heating control, maximum temperature 160°C.
The membrane material and the substrate are laminated through stable pressure.
Complete trimming, dotted lines, paper separation or winding.
Provide paper size, film type, daily output and automation needs for more accurate equipment recommendations.
The fully automatic model is more suitable for repetitive batch orders and can reduce manual operations; the hydraulic model can provide stable pressure, and the paper feeding method and configuration selection are more flexible.
Models such as 390AF PLUS, Z/YA/Y series, 400B/500B, 520B, 420B and 350E/450E are optionally equipped with double-sided lamination function.
420B and 390C can be configured with roll-to-roll lamination; 350E/450E supports roll lamination and automatic winding of finished products.
520FOIL/720FOIL is a dedicated hot stamping machine; GS-360 and 350E/450E can also support related hot stamping functions.
Please provide maximum paper or roll width, film type, substrate, target speed and daily throughput. We will provide targeted configurations based on actual working conditions instead of sending general catalogs.