Home / Products / digital printing
digital printing
Digital printing lamination film
High adhesion BOPP/PET + digital ink adaptable adhesive layer
Product Applications
Applications
short print albumPersonalized packagingDigital printingImaging output and on-demand print lamination
Technical Parameters
Key Specifications
| Reference structure | High adhesion BOPP/PET base film 20-30μ, can be equipped with low-temperature EVA or pressure-sensitive adhesive layer |
|---|---|
| lamination window | It is recommended to conduct a small test from 85-105℃; fine-tune digital electronic ink, toner and UV ink according to the ink coverage rate |
| peel/attach | Focus on verifying the risks of ink layer adhesion, silver spots, bubbling and delamination of full-page dark graphics and text |
| Optical indicators | For glossy surfaces, focus on haze ≤5% and gloss ≥85; for matte surfaces, focus on haze ≥70% and low gloss. |
| Thickness range | Commonly used for short version digital are 20/24/28/30μ, special touch or anti-scratch structure can be up to 36μ |
| Backend adaptation | Hot stamping, partial UV, indentation and plastic boxes require additional adhesion verification |
| source boundary | This table is a public reference parameter for the digital printing lamination industry. Formal quotations are subject to specific printing machine models and ink tests. |
Specification Review
Tell Us About Your Site and Product Requirements
We will match product specifications, technical information and project plans based on actual needs.- Application scenarios and target substrates
- Thickness, width, roll diameter and surface effect
- Back-end processes and target market requirements