Home / Products / In-mold label film
In-mold label film
Film inside the film
BOPP in-film labeling film
Product Applications
Applications
Injection molding cupbucketIn-mold labels for plastic containers such as boxesSuitable for food
Technical Parameters
Key Specifications
| Test model | SP-HL-35 In-membrane patch |
|---|---|
| thickness/density | Thickness 37.68μm; density 0.91 g/cm3 |
| Tensile properties | MD 127 MPa, TD 216 MPa; elongation at break MD 160%, TD 50% |
| heat shrink | MD 3.0%，TD 0% |
| friction/surface | Matt surface 0.23/0.21, glossy surface 0.27/0.19; matte surface 44 mN/m, glossy surface 39 mN/m |
| Optics/Appearance | Whiteness 68.7%; matte gloss 7.7, glossy gloss 45.5; light transmittance 34.9% |
| Application focus | Suitable for in-mold labeling of injection molding, electrostatic labeling, mold temperature and ink system need to be verified |
Specification Review
Tell Us About Your Site and Product Requirements
We will match product specifications, technical information and project plans based on actual needs.- Application scenarios and target substrates
- Thickness, width, roll diameter and surface effect
- Back-end processes and target market requirements